boot-loader file flash:/S6820-CMW710-R6301.ipe slot 1 main Verifying the file flash:/S6820-CMW710-R6301.ipe on slot 1.....Done. H3C S6820-56HF images in IPE: s6820-cmw710-boot-r6301.bin s6820-cmw710-system-r6301.bin This command will set the main startup software images. Continue? [Y/N]: y Add images to slot 1. Decompressing file s6820-cmw710-boot-r6301.bin to flash:/s6820-cmw710-boot-r6301.bin..............Done. Decompressing files6820-cmw710-system-r6301.bin to flash:/s6820-cmw710-system-r6301.bin.................... %Jan 1 02:36:31:470 2011 H3C IFNET/3/PHY_UPDOWN: Physical state on the interface M-GigabitEthernet0/0/0 changed to dowm. %Jan 1 02:36:31:472 2011 H3C IFNET/5/LINK_UPDOWN: Line protocol state on the interface M-GigabitEthernet0/0/0 changed to dowm. ...........Done. Verifying the file flash:/s6820-cmw710-boot-r6301.bin on slot 1...Done. Verifying the file flash:/s6820-cmw710-system-r6301.bin on slot 1....Done. %Jan 1 02:36:45:515 2011 H3C IFNET/3/PHY_UPDOWN: Physical state on the interface M-GigabitEthernet0/0/0 changed to up. %Jan 1 02:36:45:515 2011 H3C IFNET/5/LINK_UPDOWN:Line protocol state on the interface M-GigabitEthernet0/0/0 changed to up. The images that have passed all examinations will be used as the main startup software images at the next reboot on slot 1. Decompression completed. You are recommended to delete the .ipe file after you set startup software images for allslots. Do you want to delete flash:/S6820-CMW710-R6301.ipe now? [Y/N]: y