boot-loader file flash:/5940-CMW710-R6710.ipe slot 1 main Verifying the file flash:/5940-CMW710-R6710.ipe on slot 1......Done HPE FF 5940 48SFP+ 6QSFP28 Switch images in IPE: 5940-cmw710-boot-r6710.bin 5940-cmw710-system-r6710.bin This command will set the main startup software images. Continue? [Y/N]:y Add images to slot 1. Decompressing file 5940-cmw710-boot-r6710.bin to flash:/5940-cmw710-boot-r6710.bin........................Done. Decompressing file 5940-cmw710-system-r6710.bin to flash:/5940-cnw710-system-r6710.bin..........................................................................................Done. Verifying the file flash:/5940-cmw710-boot-r6710.bin on slot 1...Done. Verifying the file flash:/5940-cmw710-system-r6710.bin on slot 1...Done. The images that have passed all examinations will be used as the main startup software images at the next reboot on slot 1. Decompression completed. You are recommened to the delete the .ipe file after you set startup software images for all slots. Do you want to delete the flash:/5940-CMW710-R6710.ipe now? [Y/N]:y save The current configuration will be written to the device. Are you sure? [Y/N]:y Please input the file name(*.cfg)[flash:/startup.cfg] (To leave the existing filename unchanged, press the enter key): flash:/startup.cfg exists,overwrite? [Y/N]:y Validating file.Please wait... Saved the current configuration to mainboard device successfully.