[root@localhostv2.82]# ethtool p4p1 Settings for p4pl : Supported ports: [ FIBRE ] Supported link modes: 10000baseSR/Ful1 Supported pause frame use: Symmetric Supports auto-negotiation: Yes Supported FEC modes: Not reported Advertisedlinkmodes: 10000baseSR/Full Advertisedpause frame use: No Advertised auto-negotiation: Yes Advertised FEC modes: Not reported Speed: 10000Mb/s Duplex: Full Port: FIBRE PHYAD: 0 Transceiver: internal Auto-negotiation: off Supports wake-on: d Wake-on: d Current message level: 0x00000007 (7) drv probe link Link detected: yes root@localhost v2.82]# ethtool-m p4p1 Identifier : 0x03 (SFP) Extended identifier : 0x04 (GBIC/SFP defined by 2-wire interface ID) Connector : 0x07 (LC) Transceiver codes : 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Transceiver type : 10G Ethernet: 10G Base-SR Encoding : 0x06 (64B/66B) BR,Nominal : 10300MBd Rate identifier : 0x00 (unspecified) Length (SMF, km) : 0km Length (SMF) : 0m Length (50um) : 80m Length (62.5um) : 20m Length (Copper) : 0m Length (OM3) : 300m Laser wavelength : 850nm Vendor name : OEM Vendor OUI : 00:00:00 Vendor PN : SFP-10G-SR Vendor rev : B4 Option values : 0x000x1a Option : RX_LoS implemented Option : TX FAULT implemented Option : TX DISABLE implemented BR margin, max : 0% BR margin, min : 0% Vendor SN : M4123456 Datecode : 210426 Optical diagnostics support : Yes